Rockford 2014+ Harley-Davidson Dual 10" Saddlebag Subwoofer & Amp Kit
When you want that next level audio performance on your 2014 or newer Harley-Davidson motorcycle, this all new Rockford Fosgate 2014+ subwoofer kit will reinvent your ride! Designed and engineered for easy integration and superior flexibility, this powerful 800 watt, dual 10-inch subwoofer kit with two custom sealed enclosures is built for true motorcycle, on-road performance. The easy plug-and-play design paired with freeway speed output create the best in class on-bike, bass experience. This subwoofer system was designed to work with your Rockford Fosgate aftermarket audio system. This kit is designed to work with select 2014+ Electra Glide, Road Glide, Street Glide models.
This Listing Includes:
(1) M5-800X4 Amplifier
(2) M1D2 -10B Element Ready Subwoofers w/ custom enclosures
(Includes direct connect wiring harness, installation hardware, and accessories)
KIT FEATURES:
-Plug-and-Play Design: Designed to work right out of the box. The included wiring and cutting template make for easy installation, all to
ensure less time in the garage and more time out riding.
-Full Throttle Bass Output: Finally, bass for your bike. The dual 10" subwoofers and enclosures were purpose built for the motorcycle
environment and deliver that on-road audio experience you've been waiting for, even at freeway speeds.
M5-800X4 AMPLIFIER:
FEATURES:
-Element Ready design with integrated harness & panel seals
-C.L.E.A.N. input/output clip detection and indicator LEDs
-Constant Power provides instantaneous delivery of output over varying impedance loads
-Focused mass heat sink allows critical aluminum material to be located around hottest internal devices
-Top mounted control panel with Element Ready smoked lens cover
SPECIFICATIONS:
Number of Channels: 4
Max Power: 800 Watts
RMS Power:
100 Watts x 4 @ 4
100 Watts x 4 @ 2
200 Watts x 2 @ 4 Bridged/Mono
Dynamic Power (PVC/PowerCube):
125 Watts x 4 @ 4
200 Watts x 4 @ 2
400 Watts x 2 @ 4 Bridged/Mono
Frequency Response: 10 Hz-50 kHz
Input Sensitivity: 150mVrms-12Vrms
Circuit Topology Class: Class AD
Efficiency: Greater than 75%
THD: Less than 0.25%
Signal Input: Low-Level: 4 RCA
High-Level: (2) 4-Pin Molex
Tone Controls: Front/Rear: 0-14dB @ 12.5kHz
Front/Rear: 0-18dB @ 45Hz
Crossover Controls: High-Pass-50 Hz - 250 Hz @ 12dB/Octave Butterworth
Low-Pass-50 Hz - 250 Hz @ 12dB/Octave Butterworth
Visual Indicators:
Power- Blue
Protect- Red
Input Clip- Red
Output Clip- Blue/Red
Power Wire Gauge: 8 AWG
Power Input Connector: Compression Terminal Block
Speaker Wire Gauge:16 AWG
Dimensions: (H x W x D)
1.7" x 4.25" x 8.41"
(42.8 mm x 108 mm x 213 mm)
M1D2-10B SUBWOOFERS:
GENERAL SPECIFICATIONS PER SUBWOOFER:
Size: 10"
Dual 2 Ohm
1-Ohm or 4-Ohm Switchable
300W RMS
1200W MAX
Frequency Response 20 Hz - 750 Hz
Voice Coil Diameter: 2.0" (50mm)
Magnet Weight (oz): 47.70 oz. (1.35 Kg)
THIELE & SMALL PARAMETERS
Fs (Hz): 34
Re (Ohms): 3.7
Le (mH): 2.22
Sd (cm2): 394.1
Qms: 7.80
Qes: 0.47
Qts: 0.44
Vas: 44.2
SPL (dB @1w/1m): 91.5
Xmax (mm): 7.0
Woofer Displacement: 2.80 (0.10 Liters)
Speaker Connector: Deutsch
DIMENSIONS::
Cutout Diameter: 8.90" (226mm)
Mounting Depth: 4.23" (107.4mm)