Rockford Fosgate 800 Watt 4-Channel Marine Element Ready Amplifier M5-800X4
Rockford designed this powerful M5 Series amplifier for marine and powersports environments, using a special "Element Ready" chassis and conformal-coated PC boards to protect against dust and water. This amp also features a UV-stable, powder-coated, cast-aluminum heatsink to help prevent corrosion, while heavy-duty molded connectors protect wiring, keeping out water and dirt. This amp will deliver reliable power through all kinds of abuse, whether it's out on the water or deep in the woods The M5-800X4 amplifier delivers 100 Watts RMS to each of your four speakers, with a Dynamic Power rating of 200 watts per channel at 2 Ohms. Bridge the amp to 2-channel operation, and you can power a pair of subs with 200 watts apiece. You can adjust the high- and low-pass filters to get the best possible sound from your speakers or subs.
FEATURES:
- Element Ready design with integrated harness & panel seals
- C.L.E.A.N. input/output clip detection and indicator LEDs.
- Constant Power provides instantaneous delivery of output over varying impedance loads.
- Focused mass heat sink allows critical aluminum material to be located around hottest internal devices.
- Top mounted control panel with Element Ready smoked lens cover.
- Low Impedance Stability.
- Proprietary Class-AD technology allows amplifier to produce more power with less current draw.
- MESHA 4 reduces MOSFET temps, lowers distortion, increases durability and prolongs device life span.
- Balanced Differential Inputs eliminates noise picked up by signal cables.
This Listing Includes:
(1) Rockford Fosgate M5-800X4 Amplifier
(1) 11" Power/ground/turn-on & speaker output harness (installed on amp)
(1) 11" Input harness (installed on amp)
(2) 14" RCA-to-Molex input adapters
(1) Power/ground/turn-on adapter plug
(2) 7.5" speaker output harnesses
(1) 3mm Allen key
Total Watts (Peak): 800 Watts
RMS Power @ 4 OHM: 100 Watts x 4
RMS Power @ 2 OHM: 100 Watts x 4
RMS Power @ 1 OHM: N/A
RMS Power @ 4 OHM Bridge: 200 Watts x 2
Dynamic Power @ 4 OHM: 125 Watts x 4
Dynamic Power @ 2 OHM: 200 Watts x 4
Dynamic Power @ 1 OHM: N/A
Dynamic Power @ 4 OHM Bridge: 400 Watts x 2
AUDIO SPECIFICATIONS:
Frequency Response: 10Hz ~ 50KHz
Signal To Noise Ratio: >105dB
Efficiency: >75%
Input Sensitivity: 150mV rms ~ 12V rms
Total Harmonic Distortion (THD+Noise): <0.25% THD+N @ 1 Watt
Low Pass Crossover Freq: 50Hz ~ 250Hz @ 12dB per Octave Butterworth
High Pass Crossover Freq: 50Hz ~ 250Hz @ 12dB per Octave Butterworth
Tone Controls: Front/Rear: 0 ~ 14dB @ 12.5KHz, Front/Rear: 0 ~ 18dB @ 45Hz
Power Connections: 8 AWG
Speaker Wire Gauge: 16 AWG
Heatsink: Extruded Aluminum
Fuse Rating: 100A
Operating Voltage Range: 9 ~ 16V DC
FEATURES:
Amplifier Class: AD
Amplifier Type: Marine Amp
Number Of Channels: 4
Minimum Impedance: 2 Ohm
Signal Input: Low Level: 4 RCA / High Level: (2) 4 Pin Molex
Led Indicator: Power/Protect/Input Clip/Output Clip
IP Rating: IPX6 (Water Spray)
Punch EQ: Yes
Signal Sense/DC Offset Turn On: Yes
DIMENSIONS:
Overall Length: 8.41 (213mm)
Overall Width: 4.25 (108mm)
Overall Height: 1.7 (42.8mm)
Unit Weight: 4.19 lbs