Rockford Harley Davidson TourPak/Fairing Speakers, Amplifier, Amp Kit, & Radio
This Rockford Stage 2 audio system lets you add a high-performance 4-speaker, 400-watt audio system to your motorcycle, specifically built for select 1998-2013 Harley-Davidson Electra Glide Ultra Classic models. System includes a replacement digital media receiver, two 6.5" fairing speakers, two 5.25" TourPak speakers, a 400 watt 4-channel amplifier, and complete installation kit. No drilling or cutting required! Kits bolt to factory attachment points. Direct connect wiring harnesses for Harley-Davidson models.
This Listing Includes:
(2) TMS6SG 6.5" Fairing Speakers
(2) TMS5 5.25" TourPak Speakers
(1) PMX-HD9813 Digital Media Receiver
(1) TM400X4ad 4 Channel Amplifier
(1) RFK-HD9813 Amplifier Wiring Kit
TMS6SG Fairing Speaker Specifications:
Nominal Impedance (Ohms): 4-Ohm
Nominal Diameter: 6.5"
Frequency Response (Hz): 56 Hz - 20 kHz
Power Handling (MAX): 150 Watts
MAX Power Handling (RMS): 75 Watts
RMS Crossover: Built-in tweeter crossover
Voice Coil Diameter (in/mm): 1.40" (35.6 mm)
Speaker Type: 2-Way Coax
TMS5 TourPak Speaker Specifications:
CEA-2031 Compliant
Speaker Type: 2-Way Coax
Nominal Diameter: 5.25"
Frequency Response (Hz): 64 Hz - 20 kHz
Nominal Impedance (Ohms): 4-Ohm
Power Handling (MAX): 130 Watts
MAX Power Handling (RMS): 65 Watts RMS
Voice Coil Diameter (in/mm): 1.40" (35.6 mm)
Midrange Mounting Depth: 2.05" (52.0mm)
PMX-HD9813 Specifications:
Operating Voltage: 9.5 - 16 VDC
Output Impedance: Less than 500 Ohms
Output Power:
25W x 4 @ 4 RMS
50W x 4 @ 2 MAX
Less than or equal to 1.0% THD+N
Frequency Response:
RCA: 20Hz - 20 kHz
High-Level: 20Hz - 20 kHz
THD+N4-Ohms: Less than 1.0 %
Channel Separation:
RCA: Greater than 50 dB
High-Level: Greater than 50 dB
Sensitivity: 40 dB
Bluetooth: 3.0+EDR A2DP 1.3
Dimensions (HxWxD)
Faceplate: 2.7" x 8.4" x 0.7" (68.4 mm x 213 mm x 17.1 mm)
Chassis: 2.5" x 8.2" x 7.5" (63.5 mm x 209.3 mm x 191 mm)
TM400X4ad Amplifier Specifications:
Number of Channels: 4
Total Power: 400 Watts
RMS Continuous Power:
100 Watts x 4 @ 4-Ohm
100 Watts x 4 @ 2-Ohm
200 Watts x 2 @ 4-Ohm Bridged
Dynamic Power:
128 Watts x 4 @ 4-Ohm
152 Watts x 4 @ 2-Ohm
290 Watts x 2 @ 4-Ohm Bridged
Bridgeable: Yes
Frequency Response: 20Hz-20kHz +/-1dB
Input Sensitivity: 150 mV to 12 V
Circuit Topology Class: Class AD
Power Wire Gauge: 8 AWG
Power Input Connector: Detachable Compression Terminal
Speaker Wire Gauge: 16 AWG
Operating Voltage: 9 - 16 VDC
Dimensions (H x W x D):
1.6 x 4.3 x 8.3 (in.) / 4.1 x 10.8 x 21.1 (cm)
RFK-HD9813 Amplifier Wiring Kit Specifications:
Battery PWR/GND Gauge: 8 AWG
Amplifier PWR/GND Gauge: 8 AWG
Speaker Wire Gauge: 16 AWG
Speaker Wire Gauge: 16 AWG
Fuse Size: 60 Amp
Fuse Type: MAXI