Rockford Audio Upgrade Kit for Polaris RZRs 4 Speakers, Amp & 10" Subwoofer
This Rockford Fosgate Stage 4 audio upgrade kit will bring incredible sound and RGB LED lights to your Ride Command-equipped Polaris RZR. With four speakers, a 4-channel amplifier and a 10" subwoofer, this Color Optix system will be a great upgrade. This audio kit is Color Optix enabled by featuring our Color Optix controller to allow color adjustment of speakers and rear moto-cans. This audio system is 100% Element Ready and provides ability to take your off-road vehicle into any environment. Amplifier employs Rockford Fosgate preset for easy set up allowing maximum performance without any tuning. System features a plug and play design, does not require any cutting or drilling of your vehicle. Designed and built by Rockford Fosgate for select 2014 - 2021 Polaris RZR Models.
This Listing Includes:
(1) Rockford Fosgate M5-800X4 Amplifier
(1) Rockford Fosgate RZR14-K8 Polaris RZR Amplifier Wiring Kit
(2) Rockford Fosgate M1-65B 6.5" Color Optix Marine 2-Way Speakers
(2) Rockford Fosgate RZR14-FSE Polaris RZR 6.5" Front Speaker Enclosures
(1) Rockford Fosgate M1D2-10B 10" DVC 2 Color Optix Subwoofer
(1) Rockford Fosgate RZR14-FWE Polaris RZR 10" Behind Dash Subwoofer Enclosure
(2) Rockford Fosgate M1WL-65MB 6.5" Element Ready Color Optix Moto Can Speakers
(1) Rockford Fosgate MX-RSW156 Rear Speaker Wiring Harness
(1) Rockford Fosgate PMX-RGB Color Optix Light Controller with Optional App Interface
(1) Rockford Fosgate RFPOL-RC34 Polaris Ride Command Audio Adapter
M5-800X4 Amplifier Features:
-Element Ready design with integrated harness & panel seals
-PRESET removes the need to set-up and tune the amp when used with Rockford Fosgate UTV audio kits
-Play all day, easy to integrate, and keep music playing for extended lengths of time
M5-800X4 Amplifier Specifications:
Rated Power (RMS Continuous Power
100 Watts x 4 @ 4
100 Watts x 4 @ 2
200 Watts x 2 @ 4 Bridged/Mono less than1.0% THD+N
Dynamic Power
(PVC/PowerCube)
125 Watts x 4 @ 4
200 Watts x 4 @ 2
400 Watts x 2 @ 4 Bridged/Mono
Frequency Response:10 Hz - 50 kHz
Input Sensitivity:150mVrms - 12Vrms
M1-65B Specifications Per Speaker:
Power:75W RMS 300W MAX
Impedance: 4 Ohm
Tweeter Size: 1" (25.4mm)
Crossover: High Pass: 6dB/Octave
Sensitivity (dB @ 1W/1M): 90
Sensitivity (dB @ 2.83V/1M): 92
Frequency Response: 38 Hz - 22 kHz
M1-65B Dimensions:
Mounting Depth: 2.49" (63.18mm)
Diameter: 6.5" (165.1mm)
M1D2-10B Specifications:
Size: 10"
Impedance: Dual 2 Ohm 1-Ohm or 4-Ohm Switchable
Power: 300W RMS 1200W MAX
Frequency Response: 20 Hz - 750 Hz
Voice Coil Diameter: 2.0" (50mm)
M1D2-10B Dimensions:
Cutout Diameter: 8.90" (226mm)
Mounting Depth: 4.23" (107.4mm)
M1WL-65MB Specifications Per Speaker:
Speaker Size: 6.5"
Enclosure Design: Sealed
Enclosure Material: High density ASA
Speaker Connector: 6-pin Deutsch/Amphenol
Frequency Response (Hz): 38 Hz - 22 kHz
Nominal Impedance (Ohms): 4 Ohms
Power Handling: 75 Watts RMS 300 Watts PEAK
LED Current Draw: 0.25 A
LED Recommended Fuse: 1 A
LED Voltage Range: 9 - 16 VDC
M1WL-65MB Dimensions:
9.6" x 7.1" x 8.1" (243.2 mm x 180.5 mm x 206.4 mm)
PMX-RGB Features:
-Controller illuminates up to 8 Color Optix speakers and/or subwoofers
-RF Connect App Compatible
-RF Connect Capacity: Unlimited number of PMX-RGB