Rockford Audio Upgrade Kit for Polaris RZRs 4 Speakers, Amp & 10" Subwoofer
This Rockford Fosgate Stage 5 audio upgrade kit will bring incredible sound and RGB LED lights to your Ride Command-equipped Polaris RZR. Kit is equipped with a Ride Command interface, front speaker enclosures, M2 6.5" Color Optix speakers, 1,500-watt Element Ready amplifier, front subwoofer enclosure, M2 10" Color Optix subwoofer, 4-gauge wiring harness, M2 6.5" Color Optix moto-cans with harness, and a Color Optix controller. Kit supplied with all necessary mounting and installation hardware requiring minimal time and tools. This audio system is 100% Element Ready and provides ability to take your off-road vehicle into any environment. Amplifier employs Rockford Fosgate preset for easy set up allowing maximum performance without any tuning. System features a plug and play design, does not require any cutting or drilling of your vehicle. Designed and built by Rockford Fosgate for select Polaris Models.
This Listing Includes:
(1) Rockford Fosgate M5-1500X5 5 CH Amplifier
(1) Rockford Fosgate RZR14-K4: 4 AWG Amp Installation Kit for select Polaris RZR Models
(2) Rockford Fosgate M2-65B 6.5" Color Optix Marine 2-Way Speakers
(2) Rockford Fosgate RZR14-FSE Polaris RZR 6.5" Front Speaker Enclosures
(1) Rockford Fosgate M2D4-10IB 10" DVC 4 Color Optix Subwoofer
(1) Rockford Fosgate RZR14-FWE Polaris RZR 10" Subwoofer Enclosure
(2) Rockford Fosgate M2WL-65MB 6.5" Element Ready Color Optix Moto Can Speakers
(1) Rockford Fosgate MX-RSW16 Rear Speaker Wiring Harness
(1) Rockford Fosgate PMX-RGB Color Optix Light Controller with Optional App Interface
(1) Rockford Fosgate RFPOL-RC5 3-way active noise reduction adaptor for Polaris Ride Command
M5-1500X5 Amplifier Features:
-Element Ready design with integrated harness & panel seals
-PRESET removes the need to set-up and tune the amp when used with Rockford Fosgate UTV audio kits
-Play all day, easy to integrate, and keep music playing for extended lengths of time
M5-1500X5 Amplifier Specifications:
Total Power: 1500 Watts
Rated Power (RMS Continuous Power)
100W x 4 + 400W x 1 @ 4
100W x 4 + 600W x 1 @ 2
N/A + 600W x 1 @ 1
200W x 2 + N/A @ 4 bridged
less than 1.0% THD+N
Dynamic Power
(PVC/PowerCube)
125W x 4 + 400W x 1 @ 4
200W x 4 + 700W x 1 @ 2
N/A + 700W x 1 @ 1
400W x 2 + N/A @ 4 bridged
Frequency Response:10 Hz - 50 kHz
Input Sensitivity:150mVrms - 12Vrms
M2-65B Specifications Per Speaker:
Power:150W RMS 600W MAX
Impedance: 4 Ohm
Tweeter Size: 1" (25.4mm)
Crossover: High Pass: 12dB/Octave
Sensitivity (dB @ 1W/1M): 91.8
Sensitivity (dB @ 2.83V/1M): 92
Frequency Response: 40 Hz - 24 kHz
M2-65B Dimensions:
Mounting Depth: 2.49" (63.18mm)
Diameter: 6.5" (165.1mm)
M2D4-10IB Specifications:
Size: 10"
Impedance: 2-Ohm or 8-Ohm Switchable
Power: 400W RMS 1600W MAX
Frequency Response: 20 Hz - 750 Hz
Voice Coil Diameter: 2.0" (50mm)
M2D4-10IB Dimensions:
Cutout Diameter: 8.87" (225.3mm)
Mounting Depth: 4.44" (112.7mm)
M2WL-65MB Specifications Per Speaker:
Speaker Size: 6.5"
Enclosure Design: Sealed
Enclosure Material: High density ASA
Speaker Connector: 6-pin Deutsch/Amphenol
Frequency Response (Hz): 40 Hz - 24 kHz
Nominal Impedance (Ohms): 4 Ohms
Power Handling: 150 Watts RMS 600 Watts PEAK
PMX-RGB Features:
-Controller illuminates up to 8 Color Optix speakers and/or subwoofers
-RF Connect App Compatible
-RF Connect Capacity: Unlimited number of PMX-RGB