- Nominal Impedance: 8 Ohms RMS Watts: 140W Peak Watts: 300W
- Tweeter: Nominal Impedance: 4 Ohm Power Rating RMS: 30 Watts Max Power: 120 Watts
Massive Car Audio 6.5" Speakers 1200W 8 Ohm W/ Bullet Tweeters & 4 Ch Amplifier
Massive Audio's proven Professional High-Grade Efficiency, High Power Mid-Range Speaker designs are a result of years of experience, research and dedication to high end professional audio products.
CT4 Series Neodymium High-End Super Bullet Titanium Tweeters are high powered compression drivers that deliver rich high-frequency playback and allow for easy in-car mounting.
The BLADE BP Series Amplifiers are designed with our "Live loud and, Play Hard" motto. All amplifiers have built-in OEM line converters with RCA inputs that can take a high-level speaker signal at up to 9 Volts directly in.
This Listing Includes:
(4) Massive Audio 6.5" Loud Speakers MA-M6
(2) Massive Audio 1" Neodymium Bullet Tweeters MA-CT4
(1) Massive Audio 4 Channel Amplifier MA-BP1000.4
SPEAKER SPECIFICATIONS:
Nominal Basket Diameter: 6.5" (166mm)
Nominal Impedance: 8 Ohms
RMS Watts: 140W
Peak Watts: 300W
Sensitivity: 96dB
Recommended Hi Pass Crossover: 270 Hz
Frequency Response: 270-10KHz
Voice Coil Diameter: 1.5" (38.5mm)
Voice Coil Wire: CCAW
Former Material: Til
Frame Material: Stamped Steel
THIELE-SMALL PARAMETERS:
Equivalent Volume: Vas - 2.23L
Excursion: Xmax - 0.75mm
Free Air Resonance: Fs - 270 Hz
Mechanical Mass: Qms - 1.27
Total Factor: Qes - 0.814
Cone Area: Sd - 0.014 m2
Mechanical Mass: Mms - 0.0073 kg
BI Factor: BI - 7.7 Tm
DC Resistance: Re - 5.2 Ohms
Inductance: Le - 0.22 Mh at 1 KHz
Mechanical Compliance: Cms - 0.85 mm/N
MOUNTING DIMENSIONS:
Mounting Holes Diameter: 0.19" x 0.28" (5x7mm)
Mounting Holes: B.C.D. 6.06" (154mm)
Depth: 3.3" (84mm)
TWEETER SPECIFICATIONS:
Throat Size: 1", 25.5mm
Nominal Impedance: 4 Ohm
Power Rating RMS: 30 Watts
Max Power: 120 Watts
Usable Frequency Range: 3KHz - 25KHz
Sensitivity: 100 dB
Magnet Weight: 37 Oz
Filter: 6dB Hi-Pass "Filter Capacitor"
Voice Coil Diameter: 25.5mm
DC Resistance (Re): 3.7 Ohm
Diaphragm Material: Titanium
Magnet Composition: Neodymium
TWEETER DIMENSIONS:
Overall Diameter: 2.3", 58mm
Mounting Holes Diameter: 70mm
Depth: 2.8", 71.12mm
AMPLIFIER SPECIFICATIONS:
Channels: 4
Peak Output Power @ 14.4V: 250W x 4
RMS @ 4 Ohms: 80W x 4
RMS @ 2 Ohms: 160W x 4
RMS Bridged @ 4 Ohms: 320W x 2
Frequency Response: 10Hz - 35KHz
Input Sensitivity: 0.2 ~ 9.0V
Signal to Noise Ratio: Greater than 90dB
THD & Noise: Less than 0.05%
Low Pass Cross Frequency: 80Hz - 3KHz
High Pass Cross Frequency: Full - 3KHz
Bass EQ: 0-6 dB/12dB @ 45 Hz
Minimum Impedance: 2 Ohm Stereo
Fuse Size: 30A x 2
AMPLIFIER DIMENSIONS ( L x W x H ):
MM: 320 x 180 x 51
Inches: 12.6 x 7.1 x 2