- This amplifier is designed to run your stereo system with the power it needs to perform! 1200 Watts maximum dynamic RMS power output of 4x 300 Watts at 2 Ohms per channel. Its high efficiency rate of 84% provides more power with less battery consumption.
- Double the power output to your speakers by bridging two channels. Minimum impedance of 4 Ohms per bridged channel at output power of 2 x 520 Watts RMS
- A smart electronic 2-way protection circuit protects the amp if it gets too hot or if speakers fail causing a short! Focusing in sound quality, a full range response of 20 to 26,000Hz was used to give the best sound reproduction on this tiny amplifier.
Timpano 4 Channel 1200W Peak 2 Ohm Full Range Car Audio Amplifier TPT-1000.4-2
This listing includes:
- (1) Timpano 1000W Peak 4 Channel 2 Ohm Full Range Car Audio Amplifier
Small Footprint Technology!
Timpano amplifiers raises power amplification to a new standard of quality and usability. The new line delivers the most innovative and powerful Brazilian technology in compact full range amplifiers on the market. Loaded with features, it provides an unsurpassed efficiency rate of 80-90% in a compact Class D full range amplifier.
COMPACT DESIGN: Digital class D Brazilian technology allows this amplifier to have a small footprint by integrating a high-speed mosfet power supply with top of line transistors to ensure performance in a small heat sink without compromising performance.
- Dimensions: 8.11" depth x 8.11" width x 2.60" height
POWER: This amplifier is designed to run your stereo system with the power it needs to perform! 1200 Watts maximum dynamic RMS power output of 4x 300 Watts at 2 Ohms per channel. Its high efficiency rate of 84% provides more power with less battery consumption.
BRIDGEABLE: Double the power output to your speakers by bridging two channels. Minimum impedance of 4 Ohms per bridged channel at output power of 2 x 520 Watts RMS
TECHNOLOGY: A smart electronic 2-way protection circuit protects the amp if it gets too hot or if speakers fail causing a short! Focusing in sound quality, a full range response of 20 to 26,000Hz was used to give the best sound reproduction on this tiny amplifier.
Features:
- Fork terminal connector power and speaker wire Inputs.
- Built-in crossover filters for easy tuning!
- Choose between a fixed HPF at 90Hz or LPF at 90Hz or just turn it FLAT and use your external crossover or DSP settings.
- It also includes Variable Gain Control.
- Level controls are not for adjusting volume. They adjust the amount of signal that is coming into the amplifier from your signal source.
Specifications:
- Number of Channels: 4
- Max Dynamic Output: 4 x 300 Watts RMS 2 Ohms
- RMS Power at 2 Ohms 12.6 Volts: 4x 225 Watts RMS
- RMS Power at 4 Ohms 12.6 Volts: 4x 140 Watts RMS
- Bridged RMS Power at 4 Ohms 12.6 Volts: 2x 450 Watts RMS
- Supply Voltage: 11 ~ 16V
- Frequency Response: 20Hz ~ 26KHz
- Crossover Low Pass: Fixed at 90Hz
- Crossover High Pass: Fixed at 90Hz
- Signal to Noise: > 90 dB
- Harmonic Distortion: < 0.9 % THD
- Input Sensitivity: 0.2 V
- Input Impedance: 14K Ohms
- Impedance Output: 2 Ohms
- Consumption with Signal Musical: 4A ~ 50A
- Dimensions (L x W x H): 8.11" x 8.11" x 2.60"
- Weight: 3.75 Lbs
Before Installing:
You must follow the instructions for the product's installation and connections to guarantee optimal performance. If you have any questions, get in touch with us. Before using the amplifier, always follow these guidelines:
Make sure the amplifier is switched off before adding or removing any connections. This prevents possible damage to the equipment connected to the amplifier;
Keep all cables as far away as possible from the ignition cables, electronic injection modules and starter switch since they may cause noise interference;
Always use 100% Cooper cables and good quality connectors. This guarantees the sound's quality and fidelity;
To avoid damaging the cables, make sure that they do not touch sharp metal edges. Important: Use a 60A fuse 12 inches away from the battery as a safety precaution
The power rated data are based on equipment from the PRV Audio Group laboratory. Frequency reference of 1Khz with THD+N to <=10% in impedances referring to the indicated in each measurement. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications ( with speakers ), any load test ( resistant load ) is not recommended.
Accepted Payment Methods at Big Jeff Audio
At Big Jeff Audio, we strive to make your shopping experience as smooth as possible by offering a wide variety of payment options. Below is a complete list of the payment methods we accept:
Credit and Debit Cards
- Visa
- Mastercard
- American Express
- Discover
- Diners Club
Digital Wallets
- Amazon Pay
- Apple Pay
- Meta Pay (formerly Facebook Pay)
- Google Pay
- Shop Pay
- PayPal
International Payment Methods
Bank Transfers
Financing Options
We also offer financing options to make purchasing easier. Learn more about our financing options here.
- Klarna
- Affirm
- Sezzle
- Snap
- Acima
- Tiptop
If you have any questions or need assistance with payments, feel free to reach out to us at info@bigjeffaudio.com or call us at 737-BIG-JEFF.
Shipping Options and Delivery Time
Do You Offer Expedited Shipping?
Yes! At checkout, you can select from different shipping options:
- Standard Shipping: Free for orders over $100.
- Expedited Shipping: Available at an additional cost, calculated based on the weight and destination of your order.
How Long Does Delivery Take?
- Handling Time: Most orders are processed and shipped within 1 business day after receiving cleared payment. Occasionally, additional handling time may be required, but we’ll notify you if that’s the case.
- Standard Shipping: Typically takes 3-5 business days, though delivery may be affected by extreme weather or holidays.
What Happens If My Package Is Undeliverable?
If your package is refused or marked undeliverable and returned to us by the carrier, you’ll need to pay the full shipping cost to have the package resent. Alternatively, we can refund your order, minus the cost of shipping.
Why Can’t I Track My Order?
If you're having trouble tracking your order:
- Make sure you’ve received the shipping confirmation email with the tracking number.
- Log into your account on our website and use the “Check Your Order Status” button.
- If the issue persists, please refer to our detailed guide on tracking your order or contact our customer service team for further assistance.
