- 8,000W RMS @ 1 Ohm: Delivers 8,000 watts RMS x1 @ 1 ohm, 4,000W @ 2 ohms, and 2,000W @ 4 ohms, with up to 16,000W RMS x1 @ 2 ohms when linked, built for extreme subwoofer systems and competition-level output.
- Digital Class-D Linkable Monoblock: High-efficiency digital Class-D design with dual MOS-FET PWM power supply and linkable mono capability, ideal for multi-amp setups pushing serious current.
- Full Control Over Your Substage: Equipped with a variable subsonic filter (10–50 Hz), variable low pass filter (35–250 Hz), 24 dB/octave slopes, bass boost at 45 Hz (0–9 dB), and 0–180° phase shift for precise tuning and alignment.
- 4-Way Protection for High-Power Systems: Integrated 4-way protection circuit monitors thermal conditions, voltage, speaker short, and DC offset to help keep your amp and subwoofers safe under heavy load.
- Smart Bass Remote with System Monitoring: Includes a wired remote bass control with built-in voltage and temperature display plus a clipping indicator, so you can watch your system health from the driver’s seat.
Sundown Car Audio 8000W 1 Ohm Class D Monoblock Amplifier w/ Bass Control SALT-8
This Listing Includes:
- (1) Sundown 8000W 1 Ohm Amplifier SALT-8
- (1) Bass Control
The Sundown Audio SALT-8 is built for serious bass enthusiasts who want massive power, clean response, and tight control over their substage. Rated at 8,000 watts RMS x1 @ 1 ohm, this Class-D monoblock amplifier is designed for extreme SPL builds, demo vehicles, and high-output daily systems that demand real power on tap. When linked, the SALT-8 can deliver up to 16,000 watts RMS x1 @ 2 ohms, making it a centerpiece for ultra-high-output setups.
At its core, the SALT-8 uses a digital Class-D design with a dual MOS-FET PWM power supply for efficient, consistent output. The tuning section is loaded with tools to dial in your subs: a variable subsonic filter from 10–50 Hz, a variable low pass filter from 35–250 Hz, both with steep 24 dB/octave slopes, and a bass boost centered at 45 Hz, adjustable from 0–9 dB. A phase shift control from 0–180 degrees lets you align your subwoofers with the rest of your system for maximum impact.
To protect your investment, Sundown includes a 4-way protection circuit that continuously monitors thermal conditions, supply voltage, speaker short circuits, and DC offset. The included wired remote does more than just adjust output: it displays system voltage and temperature and features a clipping indicator, giving you live feedback so you can push the system hard without guessing.
Designed to operate from 9–15.5V and tested at 12.8V with less than 1% THD, the SALT-8 is engineered for real-world use in serious builds. With its large footprint and an 800-amp recommended fuse rating, proper electrical upgrades are required, but the payoff is crushing low-frequency performance backed by Sundown Audio’s reputation in the high-power game.
Features
- Digital Class-D Linkable Mono Block Amplifier
- Dual MOS-FET PWM Power Supply
- 1 Ohm Stable Load
- 24 dB/Octave - Variable Low Pass Filter
- 24 dB/Octave - Variable Subsonic Filter
- 9 dB/Octave - Variable Bass Boost
- 180 Variable Phase Shift
- 4 Way Protection Circuit (Thermal, Voltage, Speaker Short, DC Offset)
- Wired Remote Control with Voltage & Temperature Display and Clipping Indicator
Specifications:
- Amplifier Type: Monoblock Class-D
- Model: Sundown Audio SALT-8
- RMS Power @ 1 Ohm (Mono): 8,000 x 1 watts RMS
- RMS Power @ 2 Ohms (Mono): 4,000 x 1 watts RMS
- RMS Power @ 4 Ohms (Mono): 2,000 x 1 watts RMS
- RMS Power Linked @ 2 Ohms: 16,000 x 1 watts RMS (linked mode)
- Load Stability: 1-ohm stable (mono operation)
- Input Sensitivity: 6V – 0.2V
- Variable Subsonic Crossover Filter: 10 Hz – 50 Hz, 24 dB/octave
- Variable Low Pass Filter: 35 Hz – 250 Hz, 24 dB/octave
- Bass Boost: 0–9 dB @ 45 Hz, 9 dB/octave
- Phase Shift Control: 0–180 degrees
- Efficiency: > 90%
- Signal-to-Noise Ratio: > 90 dB
- Damping Factor: > 400
- Frequency Response: 10 Hz – 250 Hz
- Tested Voltage & THD: 12.8V, less than 1% THD
- Protection: 4-way (thermal, voltage, speaker short, DC offset)
- Remote: Wired remote control with voltage display, temperature display, and clipping indicator
- Operation Voltage: DC 9V – 15.5V power input
- Recommended Fuse: 800 amps total
Dimensions :
- Length: 30.71"
- Width: 10.08"
- Height: 2.96"
Accepted Payment Methods at Big Jeff Audio
At Big Jeff Audio, we strive to make your shopping experience as smooth as possible by offering a wide variety of payment options. Below is a complete list of the payment methods we accept:
Credit and Debit Cards
- Visa
- Mastercard
- American Express
- Discover
- Diners Club
Digital Wallets
- Amazon Pay
- Apple Pay
- Meta Pay (formerly Facebook Pay)
- Google Pay
- Shop Pay
- PayPal
International Payment Methods
Bank Transfers
Financing Options
We also offer financing options to make purchasing easier. Learn more about our financing options here.
- Klarna
- Affirm
- Sezzle
- Snap
- Acima
- Tiptop
If you have any questions or need assistance with payments, feel free to reach out to us at info@bigjeffaudio.com or call us at 737-BIG-JEFF.
Shipping Options and Delivery Time
Do You Offer Expedited Shipping?
Yes! At checkout, you can select from different shipping options:
- Standard Shipping: Free for orders over $100.
- Expedited Shipping: Available at an additional cost, calculated based on the weight and destination of your order.
How Long Does Delivery Take?
- Handling Time: Most orders are processed and shipped within 1 business day after receiving cleared payment. Occasionally, additional handling time may be required, but we’ll notify you if that’s the case.
- Standard Shipping: Typically takes 3-5 business days, though delivery may be affected by extreme weather or holidays.
What Happens If My Package Is Undeliverable?
If your package is refused or marked undeliverable and returned to us by the carrier, you’ll need to pay the full shipping cost to have the package resent. Alternatively, we can refund your order, minus the cost of shipping.
Why Can’t I Track My Order?
If you're having trouble tracking your order:
- Make sure you’ve received the shipping confirmation email with the tracking number.
- Log into your account on our website and use the “Check Your Order Status” button.
- If the issue persists, please refer to our detailed guide on tracking your order or contact our customer service team for further assistance.
