- Up to 6,000W RMS @ 1 Ohm: Delivers 6,000 watts RMS x1 @ 1 ohm, 3,000W @ 2 ohms, and 1,500W @ 4 ohms, with 12,000W RMS @ 2 ohms when linked, making it a powerhouse for extreme bass and competition builds.
- Digital Class-D Monoblock with Linkable Design: High-efficiency digital Class-D architecture with dual MOS-FET PWM power supply and linkable mono operation, ideal for multi-amp setups needing serious output.
- Advanced Tuning & Control: Features variable subsonic (10–50 Hz) and low pass filters (35–250 Hz) with 24 dB/octave slopes, variable bass boost at 45 Hz (0–9 dB), and phase shift control from 0–180° for precise substage alignment.
- 4-Way Protection & Smart Bass Remote: Built-in 4-way protection (thermal, voltage, speaker short, DC offset) plus a wired remote with voltage and temperature display and clipping indicator to help you keep your system safe and clean.
- High Efficiency, High Control: With >90% efficiency, >90 dB signal-to-noise ratio, and damping factor over 400, the SALT-6 delivers tight, controlled low end and strong cone control, even at high output.
Sundown 6000 Watt RMS 1-Ohm Class D Monoblock Amplifier w/ Bass Control SALT-6
This Listing Includes:
- (1) Sundown 1-ohm Amplifier SALT-6
- (1) Bass Remote
The Sundown Audio SALT-6 is built for serious bass heads who demand huge power and tight control from their amplifier. Rated at 6,000 watts RMS x1 @ 1 ohm, this Class-D monoblock is ready to drive heavy subwoofer setups in demo vehicles, competition builds, and extreme daily systems. For even more output, the SALT-6 is linkable, delivering up to 12,000 watts RMS x1 @ 2 ohms when run in a linked configuration.
At the core of the SALT-6 is a digital Class-D design with a dual MOS-FET PWM power supply, engineered for high efficiency and strong current delivery. A full suite of tuning controls includes a variable subsonic filter from 10–50 Hz, a variable low pass filter from 35–250 Hz (both with steep 24 dB/octave slopes), and a bass boost centered at 45 Hz, adjustable from 0–9 dB. Phase shift control from 0–180 lets you align your substage with the rest of your system for maximum impact.
To help protect your investment, Sundown built in a 4-way protection circuit that monitors thermal conditions, voltage, speaker shorts, and DC offset. The included wired remote doesn’t just adjust level – it also displays system voltage and temperature and features a clipping indicator, giving you real-time feedback from the driver’s seat.
Operating from 9–15.5V and tested at 12.8V with less than 1% THD, the Sundown SALT-6 is made to perform under real-world conditions. With a large footprint and a high recommended fuse rating of 600 amps, proper electrical upgrades are a must, but the reward is a brutally strong, clean, and controlled low-frequency foundation for your build.
Features:
- Digital Class-D Linkable Mono Block Amplifier
- Dual MOS-FET PWM Power Supply
- 1 Ohm Stable Load
- 24 dB/Octave - Variable Low Pass Filter
- 24 dB/Octave - Variable Subsonic Filter
- 9 dB/Octave - Variable Bass Boost
- 180 Variable Phase Shift
- 4 Way Protection Circuit (Thermal, Voltage, Speaker Short, DC Offset)
- Wired Remote Control with Voltage & Temperature Display and Clipping Indicator
Specifications:
- Amplifier Type: Monoblock Class-D
- Model: Sundown Audio SALT-6
- RMS Power @ 1 Ohm (Mono): 6,000 x 1 watts RMS
- RMS Power @ 2 Ohms (Mono): 3,000 x 1 watts RMS
- RMS Power @ 4 Ohms (Mono): 1,500 x 1 watts RMS
- RMS Power Linked @ 2 Ohms: 12,000 x 1 watts RMS (linked mode)
- Load Stability: 1-ohm stable (mono operation)
- Input Sensitivity: 6V – 0.2V
- Variable Subsonic Filter: 10 Hz – 50 Hz, 24 dB/octave
- Variable Low Pass Filter: 35 Hz – 250 Hz, 24 dB/octave
- Bass Boost: 0–9 dB @ 45 Hz, 9 dB/octave
- Phase Shift Control: 0–180 degrees
- Efficiency: > 90%
- Signal-to-Noise Ratio: > 90 dB
- Damping Factor: > 400
- Frequency Response: 10 Hz – 250 Hz
- Tested Voltage & THD: 12.8V, less than 1% THD
- Protection: 4-way (thermal, voltage, speaker short, DC offset)
- Remote: Wired remote control with voltage display, temperature display, clipping indicator
- Operation Voltage: DC 9V – 15.5V power input
- Recommended Fuse: 600 amps total
Dimensions:
- Length: 26.78"
- Width:10.08"
- Height: 2.96"
Accepted Payment Methods at Big Jeff Audio
At Big Jeff Audio, we strive to make your shopping experience as smooth as possible by offering a wide variety of payment options. Below is a complete list of the payment methods we accept:
Credit and Debit Cards
- Visa
- Mastercard
- American Express
- Discover
- Diners Club
Digital Wallets
- Amazon Pay
- Apple Pay
- Meta Pay (formerly Facebook Pay)
- Google Pay
- Shop Pay
- PayPal
International Payment Methods
Bank Transfers
Financing Options
We also offer financing options to make purchasing easier. Learn more about our financing options here.
- Klarna
- Affirm
- Sezzle
- Snap
- Acima
- Tiptop
If you have any questions or need assistance with payments, feel free to reach out to us at info@bigjeffaudio.com or call us at 737-BIG-JEFF.
Shipping Options and Delivery Time
Do You Offer Expedited Shipping?
Yes! At checkout, you can select from different shipping options:
- Standard Shipping: Free for orders over $100.
- Expedited Shipping: Available at an additional cost, calculated based on the weight and destination of your order.
How Long Does Delivery Take?
- Handling Time: Most orders are processed and shipped within 1 business day after receiving cleared payment. Occasionally, additional handling time may be required, but we’ll notify you if that’s the case.
- Standard Shipping: Typically takes 3-5 business days, though delivery may be affected by extreme weather or holidays.
What Happens If My Package Is Undeliverable?
If your package is refused or marked undeliverable and returned to us by the carrier, you’ll need to pay the full shipping cost to have the package resent. Alternatively, we can refund your order, minus the cost of shipping.
Why Can’t I Track My Order?
If you're having trouble tracking your order:
- Make sure you’ve received the shipping confirmation email with the tracking number.
- Log into your account on our website and use the “Check Your Order Status” button.
- If the issue persists, please refer to our detailed guide on tracking your order or contact our customer service team for further assistance.
