- MORE CONE AREA FOR LOUDER BASS OUTPUT: The Solo-Baric square cone design provides up to 20% more cone area than conventional round subwoofers, allowing the L7S to move more air and produce louder, deeper bass from the same mounting space.
- HIGH POWER HANDLING PERFORMANCE: Rated for 600 watts RMS and 1200 watts peak power handling, the L7S is designed to deliver strong low-frequency performance for daily systems and aggressive bass builds.
- SOLOKON ONE-PIECE CONE TECHNOLOGY: KICKER’s SoloKon injection-molded polypropylene cone uses a rear cone brace with continuous perimeter welds for increased rigidity, improved control, and reduced cone deformation under heavy excursion.
- EXTREME EXCURSION DURABILITY: The stitched Santoprene rubber surround uses a long-throw positive-roll design with reinforced ribbed corners to maintain linear cone motion while resisting tears and distortion during high-output playback.
- FLEXIBLE WIRING OPTIONS FOR SYSTEM BUILDS: Dual 2-ohm voice coils allow the woofer to be wired to either a 1-ohm or 4-ohm final load, giving installers more flexibility when matching amplifiers and designing systems.
Kicker Solo-Baric L7 10" 600 Watt RMS Dual 2 ohm Voice Coil Subwoofer 44L7S102
This Listing Includes
- (1) Kicker 10" Subwoofer 44L7S102
The Kicker Solo-Baric L7S 10-inch square subwoofer is engineered for bassheads who want maximum output, deep low-end extension, and legendary KICKER performance in a compact footprint. Unlike traditional round subwoofers, the L7S uses KICKERâs patented square cone design to provide up to 20% more cone area, allowing the woofer to move more air for louder, deeper, and harder-hitting bass.
Built around KICKERâs advanced SoloKonâ one-piece cone structure, the L7S combines lightweight efficiency with extreme strength and control. The reinforced rear cone brace integrates directly into the cone structure for improved rigidity and reduced deformation during high excursion.
The massive Santoprene rubber surround, ribbed corner design, perimeter venting, and UniPlateâ thermal management system allow the L7S to stay cool and controlled even during aggressive demo sessions and extended daily abuse.
Whether you're building a compact sealed setup for tight musical response or a loud ported enclosure for ground-shaking lows, the Solo-Baric L7S delivers the signature bass performance that made square subs legendary.
Features
- Dual 2-Ohm Voice Coil Configuration
- Signature Solo-Baric Square Cone Design
- Injection-Molded Polypropylene Cone
- SoloKonâ 360-Degree Back Bracing
- Patented Corner Ribs Reduce Distortion
- Ribbed Santoprene Surround With Blue Stitching
- UniPlateâ Back Plate And Pole Piece
- Advanced Perimeter Venting System
- Heavy-Duty Cast Aluminum Basket
- Thick Tinsel Leads For Reliability
- Satin Nickel Spring-Loaded Speaker Terminals
- Designed For Sealed Or Ported Enclosures
Specifications:
- Speaker Size: Square 10"
- RMS Power Handling: 600 Watts
- Peak Power Handling: 1200 Watts
- Voice Coil Configuration: Dual 2-Ohm
- Final Wiring Options: 1 Ohm or 4 Ohm
- Sensitivity: 85.87 dB @ 1W/1M
- Frequency Response: 24Hz - 100Hz
- Xmax: 16.25 mm
- Fs: 37.5 Hz
- Vas: 28.347 L
- Qts: 0.507
Construction Features
- Cone Material: SoloKon Injection-Molded Polypropylene
- Surround Material: Santoprene Rubber
- Basket Material: Cast Aluminum
- Magnet Type: Large Ceramic Magnet
- Terminal Type: Nickel-Plated Spring-Loaded
- Recommended Wire Size: Up To 10 Gauge
Dimensions:
- Top Mount Depth: 6-1/4"
- Cutout Size: 9.324" x 9.324" Square
- Frame Width: 10.746"
- Frame Length: 10.746"
Recommended Enclosure Specifications
Sealed Enclosure
- Minimum Volume: 1.0 cu ft
- Maximum Volume: 1.25 cu ft
Ported Enclosure
Minimum Recommended
- Volume: 1.25 cu ft
- Port Opening: 2.5" x 11.25"
- Port Length: 19.75"
Maximum Recommended
- Volume: 2.25 cu ft
- Port Opening: 3" x 11.25"
- Port Length: 18"
Important Installation Notes
- This subwoofer REQUIRES a square cutout enclosure opening and will not properly fit standard round subwoofer cutouts.
- Required cutout opening: 9.324" x 9.324"
- Due to the advanced suspension design, KICKER recommends approximately two weeks of daily playback for proper break-in and optimal bass performance.
- Break-in allows the suspension to loosen naturally, improving low-frequency extension, bass smoothness, and overall output.
Accepted Payment Methods at Big Jeff Audio
At Big Jeff Audio, we strive to make your shopping experience as smooth as possible by offering a wide variety of payment options. Below is a complete list of the payment methods we accept:
Credit and Debit Cards
- Visa
- Mastercard
- American Express
- Discover
- Diners Club
Digital Wallets
- Amazon Pay
- Apple Pay
- Meta Pay (formerly Facebook Pay)
- Google Pay
- Shop Pay
- PayPal
International Payment Methods
Bank Transfers
Financing Options
We also offer financing options to make purchasing easier. Learn more about our financing options here.
- Klarna
- Affirm
- Sezzle
- Snap
- Acima
- Tiptop
If you have any questions or need assistance with payments, feel free to reach out to us at info@bigjeffaudio.com or call us at 737-BIG-JEFF.
Shipping Options and Delivery Time
Do You Offer Expedited Shipping?
Yes! At checkout, you can select from different shipping options:
- Standard Shipping: Free for orders over $100.
- Expedited Shipping: Available at an additional cost, calculated based on the weight and destination of your order.
How Long Does Delivery Take?
- Handling Time: Most orders are processed and shipped within 1 business day after receiving cleared payment. Occasionally, additional handling time may be required, but we’ll notify you if that’s the case.
- Standard Shipping: Typically takes 3-5 business days, though delivery may be affected by extreme weather or holidays.
What Happens If My Package Is Undeliverable?
If your package is refused or marked undeliverable and returned to us by the carrier, you’ll need to pay the full shipping cost to have the package resent. Alternatively, we can refund your order, minus the cost of shipping.
Why Can’t I Track My Order?
If you're having trouble tracking your order:
- Make sure you’ve received the shipping confirmation email with the tracking number.
- Log into your account on our website and use the “Check Your Order Status” button.
- If the issue persists, please refer to our detailed guide on tracking your order or contact our customer service team for further assistance.
