Dual RAGEXL V2 15" 3500W RMS D2 Subwoofers & a ZERO 12 12,500W Mono Amplifier

• COMPLETE B2 AUDIO BASS BUNDLE: Includes (2) B2 Audio RAGEXL V2 15-inch dual 2-ohm subwoofers, model B2-RAGEXL15-D2-V2, and (1) B2 Audio ZERO 12 Class-D half-bridge monoblock amplifier, model B2-ZERO12.
• 7,000W RMS DUAL-15 SYSTEM: Each RAGEXL V2 15 handles 3,500 watts RMS and 10,000 watts max, providing 7,000 watts RMS and 20,000 watts max combined power handling for serious high-output bass builds.
• RECOMMENDED 2-OHM FINAL LOAD: Wire each subwoofer’s dual 2-ohm voice coils in series, then wire both subwoofers in parallel for a 2-ohm final impedance. This configuration matches the included amplifier safely; do not wire this bundle to 0.5 ohm.
• ZERO 12 POWER OUTPUT: The included Korean half-bridge Class-D monoblock delivers 7,000W RMS at 13.8V and 7,500W RMS at 14.4V into 2 ohms. It also produces up to 12,500W RMS at 1 ohm with a 14.4V electrical system.
• BUILT FOR EXTREME BASS: RAGEXL V2 subwoofers feature carbon-fiber cones, massive 3-inch dual voice coils, high-excursion design, and custom-tooled baskets. A properly upgraded electrical system, correctly fused OFC wiring, suitable enclosure, and careful gain setting are required; installation accessories are not included.

Dual RAGEXL V2 15" 3500W RMS D2 Subwoofers & a ZERO 12 12,500W Mono Amplifier

This Listing Includes:

• (2) 15" Dual 2-Ohm Subwoofers B2-RAGEXL15-D2-V2


• (1) ZERO 12 Amplifier B2-ZERO12

Unleash a serious B2 Audio bass build with two RAGEXL V2 15-inch subwoofers and the powerhouse ZERO 12 monoblock amplifier. Each RAGEXL15-D2-V2 handles 3,500 watts RMS, giving this bundle a combined 7,000-watt RMS subwoofer rating.

The included ZERO 12 is the ideal match when the two dual 2-ohm subwoofers are wired to a 2-ohm final load. At that impedance, the amp delivers 7,000 watts RMS at 13.8V and 7,500 watts RMS at 14.4V—plenty of clean, controlled power for this high-output dual-15 setup.

Built for serious bassheads, demos, and SPL-minded builds, the RAGEXL V2 features a carbon-fiber cone, massive 3-inch dual voice coils, extreme excursion capability, and a custom-tooled basket. The ZERO 12 brings Korean half-bridge Class-D power, adjustable crossover controls, oversized terminals, and the current capacity needed to support a no-compromise bass system.

Features

• Complete B2 Audio amplifier and dual 15-inch subwoofer bundle


• Two RAGEXL V2 15-inch dual 2-ohm subwoofers


• 7,000 watts RMS combined subwoofer power handling


• 20,000 watts max combined subwoofer power handling


• Recommended 2-ohm final load for the included ZERO 12 amplifier


• ZERO 12 produces 7,000W RMS at 13.8V / 7,500W RMS at 14.4V at 2 ohms


• Carbon-fiber cones, 3-inch DVC platforms, and high-excursion RAGEXL V2 construction


• ZERO 12 Korean Class-D half-bridge monoblock amplifier


• Ideal for high-output daily systems, demos, and competition-oriented builds

Recommended Wiring Configuration

Wire the voice coils of each RAGEXL15-D2-V2 in series to create a 4-ohm load per subwoofer. Then wire the two subwoofers in parallel for a 2-ohm final load at the amplifier.

Do not wire this bundle to 0.5 ohm. The ZERO 12 is designed for a 1-ohm minimum load.

B2 Audio RAGEXL V2 15" D2 Specifications — Each

• RMS Power Handling: 3,500W


• Max Power Handling: 10,000W


• Nominal Impedance: Dual 2 ohm


• Voice Coil Diameter: 3"


• Cone Material: Carbon fiber


• Sensitivity: 87.4 dB


• Xmax: 23 mm


• Peak-to-Peak Excursion: 70 mm


• Free-Air Resonance: 27 Hz


• Overall Diameter: 15.48"


• Mounting Diameter: 13.5"


• Mounting Depth: 11.69"


• Overall Depth: 13.62"

B2 Audio ZERO 12 Specifications

• Circuit Configuration: HI-EF Class-D half bridge


• RMS Power at 2 Ohms:5,800W RMS at 12.6V
  
  7,000W RMS at 13.8V
  
  7,500W RMS at 14.4V
  
  


• RMS Power at 1 Ohm:9,500W RMS at 12.6V
  
  11,000W RMS at 13.8V
  
  12,500W RMS at 14.4V
  
  


• Frequency Response: 10Hz–300Hz


• Low-Pass Filter: 35Hz–250Hz


• Subsonic Filter: 10Hz–50Hz


• Phase Control: 0–180


• Signal-to-Noise Ratio: Greater than 95 dB


• Power Terminals: 0 gauge


• Speaker Terminals: 4 gauge


• Fuse Rating: 1,000A


• Dimensions: 31.5" L Ã 12.4" W Ã 2.95" H

Important Installation Note

This is a high-current system that requires a properly designed electrical upgrade, quality OFC wiring, correct fusing, a suitable enclosure, and careful gain setting. Enclosure, wiring, batteries, alternator upgrades, and installation hardware are not included.

Accepted Payment Methods at Big Jeff Audio

At Big Jeff Audio, we strive to make your shopping experience as smooth as possible by offering a wide variety of payment options. Below is a complete list of the payment methods we accept:

Credit and Debit Cards

• Visa
• Mastercard
• American Express
• Discover
• Diners Club

Digital Wallets

• Amazon Pay
• Apple Pay
• Meta Pay (formerly Facebook Pay)
• Google Pay
• Shop Pay
• PayPal

International Payment Methods

• Bancontact
• iDEAL

Bank Transfers

• Zelle

Financing Options

We also offer financing options to make purchasing easier. Learn more about our financing options here.

• Klarna
• Affirm
• Sezzle
• Snap
• Acima
• Tiptop

If you have any questions or need assistance with payments, feel free to reach out to us at info@bigjeffaudio.com or call us at 737-BIG-JEFF.

Shipping Options and Delivery Time

Do You Offer Expedited Shipping?

Yes! At checkout, you can select from different shipping options:

• Standard Shipping: Free for orders over $100.
• Expedited Shipping: Available at an additional cost, calculated based on the weight and destination of your order.

How Long Does Delivery Take?

• Handling Time: Most orders are processed and shipped within 1 business day after receiving cleared payment. Occasionally, additional handling time may be required, but we’ll notify you if that’s the case.
• Standard Shipping: Typically takes 3-5 business days, though delivery may be affected by extreme weather or holidays.

What Happens If My Package Is Undeliverable?

If your package is refused or marked undeliverable and returned to us by the carrier, you’ll need to pay the full shipping cost to have the package resent. Alternatively, we can refund your order, minus the cost of shipping.

Why Can’t I Track My Order?

If you're having trouble tracking your order:

• Make sure you’ve received the shipping confirmation email with the tracking number.
• Log into your account on our website and use the “Check Your Order Status” button.
• If the issue persists, please refer to our detailed guide on tracking your order or contact our customer service team for further assistance.