- COMPLETE B2 AUDIO BASS PACKAGE: Includes (2) B2 Audio RAGE V3 15-inch dual 1-ohm subwoofers, model B2-RAGE15-D1-V3, (1) B2 Audio RAGE 3500 Class-D monoblock amplifier, model B2-RAGE-3500, and (1) B2 voltage/temperature display bass knob with connection cable.
- 4,000W RMS DUAL-15 SUBWOOFER SYSTEM: Each RAGE V3 15 handles 2,000 watts RMS and 4,000 watts max, providing 4,000 watts RMS and 8,000 watts max combined subwoofer power handling.
- RAGE 3500 1-OHM MONOBLOCK POWER: The included Class-D amplifier delivers 3,000-3,500W RMS at 1 ohm with a sufficient electrical system. Its 0-gauge power terminal and 250A fuse rating support high-output car audio installations.
- CORRECT 1-OHM WIRING CONFIGURATION: Wire each subwoofer's dual 1-ohm voice coils in series, then wire both subwoofers in parallel for a 1-ohm final impedance. This is the recommended load for this package; do not wire this system below 1 ohm.
- BUILT FOR HIGH-OUTPUT BASS: RAGE V3 subwoofers feature carbon fiber cones with integrated dust caps, tall surrounds, 600 oz ferrite motors, 3-inch high-temperature voice coils, and 4-gauge push terminals. Properly sized OFC wiring, fusing, electrical upgrades, enclosure design, and gain setting are required; installation accessories are not included.
B2 Audio Dual RAGE V3 15" 2000W RMS D1 Subwoofers & RAGE 3500W 1-Ohm Mono Amplifier Package
This Listing Includes:
- (2) B2 Audio 15" Subwoofer B2-RAGE15-D1-V3
- (1) B2 Audio Mono Amplifier B2-RAGE-3500
- (1) B2 voltage/temperature display bass knob w/ connection cable
Build a powerful B2 Audio bass system with two RAGE V3 15-inch subwoofers and the RAGE 3500 monoblock amplifier. Each B2-RAGE15-D1-V3 handles 2,000 watts RMS, giving this package a combined 4,000-watt RMS subwoofer rating.
The dual 1-ohm RAGE V3 subwoofers are designed to be wired to a 1-ohm final load with the included RAGE 3500. At 1 ohm, the amplifier delivers 3,000 to 3,500 watts RMS with a sufficient electrical system, providing strong, controlled power for this high-output dual-15 build when properly installed and tuned.
RAGE V3 subwoofers feature carbon fiber cones with integrated dust caps, tall surrounds for increased excursion, 600 oz ferrite motors, and 3-inch high-temperature voice coils. The RAGE 3500 adds efficient Class-D performance, variable crossover controls, a 0-gauge power terminal, a voltage/temperature display bass knob, and protection circuitry for serious daily-driver, demo, and SPL-capable systems.
Features
- Complete B2 Audio RAGE amplifier and dual 15-inch subwoofer package
- Two RAGE V3 15-inch dual 1-ohm subwoofers
- 4,000 watts RMS combined subwoofer power handling
- 8,000 watts max combined subwoofer power handling
- Recommended 1-ohm final load for the included RAGE 3500 amplifier
- RAGE 3500 delivers 3,000-3,500W RMS at 1 ohm with a sufficient electrical system
- Carbon fiber cones, tall surrounds, 600 oz motors, and 3-inch high-temperature voice coils
- Includes voltage/temperature display bass knob with connection cable
- Built for high-output daily drivers, demos, and SPL-capable bass systems
Recommended Wiring Configuration
Wire the voice coils of each B2-RAGE15-D1-V3 in series to create a 2-ohm load per subwoofer. Then wire the two subwoofers in parallel for a 1-ohm final load at the amplifier.
Do not wire this package below 1 ohm. The RAGE 3500 is designed for a 1-ohm minimum load.
Subwoofer Specifications (Each):
- RMS Power Handling: 2,000W
- Max Power Handling: 4,000W
- Push Terminal Wire Gauge: 4 gauge
- Nominal Impedance: Dual 1 ohm
- Voice Coil Diameter: 3"
- Cone Material: Carbon fiber with integrated dust cap
- Frequency Response: 10Hz-500Hz
- Sensitivity: 82.4 dB
- Magnet Weight: 600 oz
- Displacement Volume: 10.7 L / 0.37 cu. ft.
- Free-Air Resonance (Fs): 26.8Hz
- Resistance (Re): 1 ohm
- Mechanical Factor (Qms): 5.11
- Electrical Factor (Qes): 0.41
- Total Factor (Qts): 0.38
- Equivalent Volume (Vas): 67.1 L
- Compliance (Cms): 70 m/N
- BL/Re: 200
- Moving Mass (Mms): 476.3 g
- Xmax: 20 mm
- Overall Diameter: 15.35"
- Mounting Diameter: 13.77"
- Bolt Pattern Diameter: 14.76"
- Mounting Depth: 8.89"
- Overall Depth: 10.24"
Amplifier Specifications:
- Circuit Configuration: Class-D full-range monoblock
- RMS Power at 4 Ohms: 1,050-1,200W
- RMS Power at 2 Ohms: 1,850-2,150W
- RMS Power at 1 Ohm: 3,000-3,500W
- Frequency Response: 10Hz-20kHz
- Signal-to-Noise Ratio: Greater than 90 dB
- Input Sensitivity: 6V-0.2V
- Power Terminal: 0 gauge
- Fuse Rating: 250A
- Bass Level: 30Hz-80Hz
- Low-Pass Crossover: 50Hz-20kHz
- High-Pass Crossover: 10Hz-2kHz
- Subsonic Crossover: 10Hz-2kHz
- Dimensions: 11.5" L x 7.25" W x 2.5" H
- Weight: 7.25 lb
Important Installation Note
This high-current system requires a properly designed electrical upgrade, quality OFC wiring, correct fusing, a suitable enclosure, and careful gain setting. Enclosure, wiring, batteries, alternator upgrades, and installation hardware are not included.
Accepted Payment Methods at Big Jeff Audio
At Big Jeff Audio, we strive to make your shopping experience as smooth as possible by offering a wide variety of payment options. Below is a complete list of the payment methods we accept:
Credit and Debit Cards
- Visa
- Mastercard
- American Express
- Discover
- Diners Club
Digital Wallets
- Amazon Pay
- Apple Pay
- Meta Pay (formerly Facebook Pay)
- Google Pay
- Shop Pay
- PayPal
International Payment Methods
Bank Transfers
Financing Options
We also offer financing options to make purchasing easier. Learn more about our financing options here.
- Klarna
- Affirm
- Sezzle
- Snap
- Acima
- Tiptop
If you have any questions or need assistance with payments, feel free to reach out to us at info@bigjeffaudio.com or call us at 737-BIG-JEFF.
Shipping Options and Delivery Time
Do You Offer Expedited Shipping?
Yes! At checkout, you can select from different shipping options:
- Standard Shipping: Free for orders over $100.
- Expedited Shipping: Available at an additional cost, calculated based on the weight and destination of your order.
How Long Does Delivery Take?
- Handling Time: Most orders are processed and shipped within 1 business day after receiving cleared payment. Occasionally, additional handling time may be required, but we’ll notify you if that’s the case.
- Standard Shipping: Typically takes 3-5 business days, though delivery may be affected by extreme weather or holidays.
What Happens If My Package Is Undeliverable?
If your package is refused or marked undeliverable and returned to us by the carrier, you’ll need to pay the full shipping cost to have the package resent. Alternatively, we can refund your order, minus the cost of shipping.
Why Can’t I Track My Order?
If you're having trouble tracking your order:
- Make sure you’ve received the shipping confirmation email with the tracking number.
- Log into your account on our website and use the “Check Your Order Status” button.
- If the issue persists, please refer to our detailed guide on tracking your order or contact our customer service team for further assistance.
