DS18 Audio 10“ Subwoofers In Ported Box 800W & S-1500.1/RD Amplifier and Amp Kit

DS18 SKU: DS-LSE-210A

$377.96

Shipping calculated at checkout

Available Now!

DS18 800w 2 X SLC-MD10 In a Ported Box S-1500.1/RD Amplifier and 4-GA Amp Kit

If you are looking for a lot of thumping bass and a very clean prefab box, we here at DS18 have developed a very strong combo to fit one of the bestselling subwoofers that we have to offer in a complete box! Now you don have to worry about building a box by yourself to spec for your new subwoofer purchase because you can buy them together with 1 easy click of the mouse. This beautiful ported box is tuned to 42hz. The ½ inch thick treated MDF ensures the box will be tough enough to withstand very strong vibrations along with giving very accurate acoustical resonances for the perfect bass response. Inside the box are two of our best-selling subs, the MD10 subwoofer. These subs have a 32 oz ferrite magnet and can take up to 200 watts RMS each and 800w maximum power! With this, you won't miss out on any of the wide range of frequencies this sub and box combo can produce!

This listing includes:
(2) SLC-MD10-Select Ppi Cone 10" Subwoofer 800 Watts Svc 4-Ohm
(1) S-1500.1/RD Select Monoblock Class AB 1 Channel Amplifier 1500 watts
(1) 4-GA Amp Kit Which Includes
- AGU Fuse Holder with AGU-100A
- 6ft. 4GA Loom Tube
- Rubber Grommet
- 17ft. Red power cable: 21mm² od: 10mm
- 3ft. Black ground cable: 21mm² od: 10mm
- 17ft. Red/black twisted RCA cable
- 17ft. Turn-on cable: 20*0.15mm
- 17ft. Red/black speaker cable: 1.31mm² x 2 wires od 3.2 x 6.4mm

Features:
- The box is constructed of 1/2 inch MDF for great strength, resonance, and tuned to 42hz for low-hitting bass.
- One SLC 10-inch sub will give you the cone area to push out great-sounding bass without a lot of power requirements.
- Great design and carpeting with DS18 logos to give your system the flair it deserves and also bring a show-quality look.

General Specifications---
-Speaker Size 2 x 10"
Total Impedance4 ohms
-Total RMS Power Handling 400 watts
-Total MAX Power Handling 800 watts
-Sensitivity (1w/1m) 94 dB
-Frequency Response 35 - 250Hz
-Recommended Lo Pass Crossover 90Hz

SLC-MD10 PER Subwoofers Specifcations---
-RMS Power: 200W
-MAX Power: 800W
-Impedance: 4 ohms
-Voice Coil Size: 2"
-Magnet Size: 32 oz.
-Frequency Response:35-1.8KHz
-Mounting Cut-Out:9.21" (234mm)
-Mounting Depth:4.6" (117mm)
-Overall Diameter:10.25" (260mm)
-Net Weight:3kg

S-1500.1/RD Amplifier Specifications---
-Number Of Channels: 1
-Frequency Response: 20Hz - 500Hz
-Max Power: 1500W
-RMS Power Output At 2 Ohm 350W
-RMS Power Output At 4 Ohm 220W
-Input Sensitivity: 0.2-6V
-Signal to noise ratio - greater than 90db
-THD: less than 0.3 percent

Measurements -
Height 13.78" / 350mm
Width 30.71" / 780mm
Depth 1 11" / 280mm
Depth 2 14" / 356mm

-BOX WEIGHT - 62.5 LB

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)