All GTX subs use tight Red stitching that's sewn through a UV-treated non-pressed paper cone onto an EROM foam surround. Then it's bonded to a heavy gauge steel basket that's bolted to double stacked high flux Y30 70-150oz Strontium ferrite magnets with a 10mm top plate. Then everything dances on a springy poly cotton spider with high powered woven tinsel leads that connect to spring-loaded 5-way binding nickel-plated speaker connectors. These woofers scream sound quality and truly represent Massive Audio's commitment to value and performance.
All "EDGE" Series Amplifiers use the famous Nano Block Military speck circuit board and "N" drive MOSFET power supplies to ensure performance but they now have several new cutting-edge features like RCA inputs that can take RCA or Speaker levels at up to 10 Volts in!
This Listing Includes:
(1) Massive Audio 12" Subwoofer GTX122
(1) Massive Audio Monoblock Amplifier E2
Features: GTX122
- Heavy-gauge Steel Basket with Industrial Texture Painting
- Dual-Stacked High Flux Y30 120oz Strontium Ferrite Magnets
- Poly-Cotton Spider with Woven Round Tinsel Leads
- UV Treated / Non-Pressed Paper Cone with EROM Foam Surround
- Round Shape PP Vacuum Dust Cap
- 10mm Top Plate
- Customized Rubber Gasket & Magnet Boot
Specifications: GTX122
-Size: 12"
-Watts RMS: 700
-Peak Power: 1400
-Cone: UV Treated / Non-Pressed Paper
-Voice Coil: 2.5" Dual 2 Ohm
-Surround: EROM Foam
-Magnet: 120oz
-Terminals: 5 Way Binding Push Terminals
-Basket: Heavy Gauge Steel
-Tinsel Leads: Woven Round
-X-Max: 15mm + 10mm top plate
-SPL: 88.6 dB
-FS: 41Hz
Dimensions: GTX122
-Ported Box: 14"H x 16"D x 16"W / 14.05 sq. in. Port Area
-Sealed Box: 1.62 ft3
-Mounting Depth: 6.69"
-Mounting Width: 10.79"
-Overall Diameter: 12.28"
Features: E2
- Built-In OEM Line Converter
- High Power in Extremely Small Heat Sink
- Mil-Spec Double Sided PCB with SMD Parts
- Built-in Noise Reduction Circuitry
- Full Mosfet with High-Grade Switching Devices
- Regulated Power Supply & Dual Output Voltage
- CTA-2006 Compliant
- Built-in Auto Sensing Turn-on via Hi-Input
- 12v Remote Output for External Devices
- 0~12dB Variable Bass Boost
- Next-Gen Advanced 5 Way Protection
Specifications: E2
-RMS Power: 800w x 1
-PEAK Power: 1600w x 1
-RMS @ 2 Ohms: 400w x 1
-Bridged RMS: n/a
-Min Impedance: 1 Ohm
-Min Ohm Bridged: n/a
-THD: Less Than 0.3% @ 4 Ohm
-S/N: More Than 80 dB
-Max Voltage: 15v
-Max RCA Voltage: 10v
-Freq. Response: 10Hz - 220Hz
Dimensions: E2
-8.0 (in) x 5.9 (in) x 2.1 (in)
Payment Information
We accept PayPal for all ebay orders. You can use your credit through PayPal as all major credit card are accepted by PayPal.
We accept PayPal for all international orders, your address must be verified with PayPal.
We are not responsible for any custom duties or brokerage fees that may apply for all international orders.
When you click on the Buy it Now button you are entering into a contract whereby you agree to purchasing the item at the price listed.
If you want to ship your item to an alternate address please add that address on your PayPal account and use the address as the default or confirmed address to pay us through PayPal
With Free Same Business Day Shipping we work to get you your order Fast.
All orders over $500 will require a signature for delivery.
All pre-selected shipping rates and methods are for customers with a valid residential or commercial address within the Contiguous 48 United States (PO Boxes address may require additional charges).
P.O. Boxes, APO/FPO addresses, Alaska, Hawaii, Puerto Rico, Guam, U.S. Virgin Islands, Northern Mariana Islands, American Samoa, Canada, and other countries may require additional shipping fees. Please contact a member of our team for detailed shipping charges.
Shipping is available only to PayPal verified addresses. When making payment please confirm your address has been verified with PayPal. Once payment is made shipping address can not be changed/altered. Payments made using an unverified PayPal address will be refunded and order will be canceled.
We will not accept request to change shipping address once payment has been made. Please confirm your shipping address is up-to-date and valid.
Typical handling time for orders is 1-business day. We do our best to ship every package with-in 1 business day of receiving a cleared payment. In some circumstances additional time may be need, in which case we will contact buyer.
Shipped orders that are returned by the shipping company due to an insufficient address or an undeliverable address will be refunded less a 20% restocking fee.
If package is refused or marked undeliverable and returned back to us by the carrier, you will need to pay the shipping cost in full to have the package sent back to you or we can refund the money minus the cost of shipping
MISSING A PACKAGE?
If you have not received your package, but the tracking information shows that it was delivered, please do the following within 36 hours of expected, stated delivery:
Verify the shipping address on the order is the address where you are looking for the package
Look for a notice of attempted delivery
Look around the delivery location for the package, or see if a neighbor has accepted the delivery
Be sure to double check your mailbox and other usual spots for package delivery
If you think that your package has been stolen, we will require a police report since this is now theft. Once we have a police report on file for the stolen package, we will reship your order.
I was skeptical of the performance from a $200 all included unit, but was massively impressed. 25hz tune for the box is true (although don’t expect a ton out of it that low) but it really shines 30-45hz. I have this in a trunk of an old cutlass and it shakes my foot pedals. It added the missing link that my car needed and was extremely easy to install. 5 stars.
This will be the second set, im still waiting on them to be shipped with the rest of my order, but the first set i bought 6 months ago were great , im looking forward to theses one's being just as nice once they ship with my basshead garage watt meter
I've got an earlier version of this Watt meter (15K) and it's a great unit. It easily allows you to find your lowest impedence so that you know you're not gonna damage your amplifier. It also lets you see the real time power numbers so you know exactly how hard you're pushing your amplifier. I also like to use it to test out amplifiers that I buy or repair to make sure they are working properly.
My only complaint is that it can't remember which screen mode it was in when you restart your vehicle. I like to see the Apparent Power, which is Raw power (Volts times Amps or VA mode), but whenever you cycle the system off and back on, it reverts back to the default screen, which is corrected power. This mode adds in the Power Factor which is a correction percentage and results in a reduced power number. Because the Power Factor can vary quite a bit, I think the Apparent Power mode is more realistic for people to use.
Without a doubt, this unit is way cheaper than the $450 AMM-1. I think that unit is more aimed at shop owners who are constantly moving it from vehicle to vehicle.
The Basshead Garage Watt meter is aimed more at the consumer who wants to install it and leave it in their vehicle so it's always there and running.
I definitely recommend it.
Pics are of me testing out an amp rated 300w at 4 ohm. It did really well.