Rockford Fosgate Prime 500W RMS x 1 at 2 Ohm Mono Subwoofer Amplifier R2-500X1

$239.99

SKU: RF-R2-500X1 Rockford Fosgate

Only 35 left!

Fast Shippng
& Handling

Secure
Checkout

Satisfaction
Guaranteed

Rockford Fosgate Prime 500W RMS x 1 at 2 Ohm Mono Subwoofer Amplifier R2-500X1

This listing includes:
(1) R2-500X1 500W Mono Subwoofer Amplifier
(1) Wired Remote Level Control Module
(1) 16" Remote cable (RJ-25 Connector on both ends)
(1) 7" Speaker Input Harnesses
(1) 3mm Allen Hex Key
(4) 3/4" Screws
(2) 1/2" Screws
(5) Flat Washers
(1) Nut
(1) Installation Manual (English / French / Spanish / German / Italian)
(1) Certificate of Performance
(1) Rockford Fosgate Contact Card

The Prime Series were developed for car audio fanatics that want a reliable amplifier – with all the power and performance you’ve come to expect from Rockford Fosgate – at an economical price. Rockford Fosgate amplifiers are renowned world-wide for being “under rated,” easily surpassing all specifications, and most importantly, generating more power than their ratings. The latest generation of Prime Series amplifiers are also designed to be easy to setup and configure, making them perfect for use with factory audio or custom aftermarket systems.

Balanced Differential Inputs with RCA Pass Through Outputs
High Level Input Capable
Defeat able Auto Turn On Circuit
Features C.L.E.A.N. Set-up
Variable Input Gain adjustment level
R.L.C. Remote Level Control
Variable Infrasonic Filter
Continuously Variable On Board Punch EQ
Top Mounted Control Panel
Short Circuit & Over Current Protection
CEA-2006 Compliant & CE Compliant
Cast aluminum heat sink
Full Range Class D
Rollback Protection
Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers

Features:
Mono Subwoofer Amplifier
Rated Power(RMS):
300W RMS x 1 @ 4 Ohm
500W RMS x 1 @ 2 Ohm
Dynamic Power(PVC/PowerCube):
350W x 1 @ 4 Ohm
590W x 1 @ 2 Ohm
Bridgeable: No
Frequency Response: 20 Hz - 250 Hz
Input Sensitivity:
Low-Level: 150 mV - 4 V
High -Level: 450 mV - 12 V
Operating Voltage: 9-16 VDC
Recommended Fuse: 80A (Not Included)

Dimensions:
1.9 x 6.8 x 8.5" (4.9 x 17.3 x 21.5 cm)
 

Customer Reviews

Based on 7 reviews
100%
(7)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
J.S.
This Amplifier amazes me

I am an electrical engineer and typically the larger the amp the better (meaning more MOSFETS, dual diodes, heat/thermal dissipation and other pre-amp electronics) When I first received this smaller amp I was skeptical. I put it on a 12" DVC 2 Ohm Punch and I couldn't believe it. Rockford Fosgate did their research on the circuitry of htis amp and that research paid off. Worth every penny, I have actually bought another one of these mono-blocks, a 4 Channel amp, Component Speakers, an 8" Subwoofer and several other products now all made by Rockford Fosgate. If you are on the fence then believe me, I have designed electronics for a living for 25 years now, this amplifier will not disappoint.

E
E.L.
As advertised.

So far so good. Everything I expected from Rockford. Hopefully I get Long life out of the product.

a
a.
Knocking hard!

This is a well put together amp. I have it pushing a 12W6v3 perfect combo!Helpful tuning feature as well!

D
D.W.G.
Rockford Fosgate never lets me down!

Amazing sound, really moves my 10” DVC sub!

W
W.7.
Hot Amp in More Ways Then One

This is a very user-friendly amp. The instructions were very precise for connecting and calibrating. It also helps that it looks nice, so it’s a great display piece. My only issue is that it gets really hot so placement is crucial. I didn’t mount or run the remote because that’s above my pay grade. Gonna go with a professional For that.