Rockford Fosgate M2-500X1 Monoblock 500 Watt Full Range Class D Marine Amplifier

$269.99

SKU: RF-M2-500X1 Rockford Fosgate

Only 23 left!

Fast Shippng
& Handling

Secure
Checkout

Satisfaction
Guaranteed

Rockford Fosgate M2-500X1 Monoblock 500 Watt Full Range Class D Marine Amplifier

Designed to withstand the elements, the M2-500X1 Element Ready™ amplifier is a 500 watt, class-D model, capable of operating at 4Ω or 2Ω mono. This amplifier is extremely efficient because of its class D technology which reduces demand on the electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass. For subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music.

This Listing Includes:
(1) Amplifier
(1) Remote Punch Level Control
(1) 16.5' Remote Punch Level Control Cable
(1) 7" Speaker Input Harness
(1) 3mm Hex Key
(4) 3/4" Screws
(2) 1/2" Screws
(5) Flat Washers
(1) Nut

Features:
- Element Ready™ design protects against outdoor exposure
- Conformal coated circuit board protects against dust and water
- UV stable powder coated cast aluminum heatsink
- Zinc Nickel-plated Marine grade brass connection terminals
- C.L.E.A.N. input/output clip detection and indicator LEDs
- Optimized using AudioGraph PowerCube measurement tool
- Continuously Variable On Board Punch EQ
- Includes RLC Remote Level Control
- Focused mass heat sink allows critical aluminum material to be located around hottest internal devices
- Top Mounted Control Panel
- Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers
- Short Circuit & Over Current Protection
- Variable Infrasonic Filter
- Integrated Power and Speaker Terminals
- Balanced Differential Inputs eliminates noise picked up by signal cables
- RCA pass-thru outputs
- Integration with OEM and Aftermarket Radios
- "Auto-Sense" turn-on with remote out (high level in)
- Auto-Sense bypass switch for vehicles with RAP (Retained Accessory Power)
- Low Impedance Stability
- Proprietary testing using RATS (Rockford Automated Testing System)

Specifications:
Number of Channels: 1
Total Power(Sum of Rated Power): 500 Watts
Bridgeable: No
Frequency Response: 20 Hz - 250 Hz
Circuit Topology Class: Class D
Tone Controls: 0 to +18 dB @ 45 Hz
Remote Controls: Yes
Power Wire Gauge: 4 AWG
Power Input Connector: Compression Terminal Block
Speaker Wire Gauge: 8 AWG
Speaker Output Connector: Compression Terminal Block
Cooling: Convection
Operating Voltage: 9 - 16 VDC
Recommended Fuse(not included): 80 A
Max. Current Draw (13.8V Sinewave): 52 A

Rated Power(RMS Continuous Power):
300 Watts x 1 @ 4Ω
500 Watts x 1 @ 2Ω

Dynamic Power(PVC/PowerCube®):
350 Watts x 1 @ 4Ω
590 Watts x 1 @ 2Ω

Input Sensitivity:
Low-Level: 150 mV - 4 V
High-Level: 450 mV - 12 V

Total Harmonic Distortion (THD+Noise):
4Ω: Less Than 1.0%
2Ω: Less Than 1.0%

Signal Input:
Low-Level: 2 RCA
High-Level: 4-Pin Molex

Signal Output:
Low-Level: 2 RCA
(Pass-Thru active with RCA or Hi-Level input)

Crossover Controls:
Low-Pass: 50 Hz - 250 Hz @ 12dB/Octave Butterworth
Infrasonic: 15 Hz - 40 Hz @ 12dB/Octave Butterworth

Visual Indicators:
Power/Protect
C.L.E.A.N. In
C.L.E.A.N. Out

Dimensions (H x W x D): 1.9" x 6.8" x 8.5"

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
M.G.S.
This is a perfect size amp for the power

this amp is such high quality and i love the design of it!